2026 ILT VACUUM TRAILER

Specifications

Capacity: 130 Barrels, 5460 gallons

Shell: ¼” thick 60” Diameter straight cylinder ASTM A572 GRADE 50 Steel

Chassis: ¼” ASTM A572 GRADE 50 Steel Formed Full Length

Heads: TORISPHERICAL ¼” thick 60” Diameter, Dished ASTM A572 GRADE 50 Steel

Baffles: (2) ¼” ASTM A572 GRADE 50 Steel

Stiffening Rings (8) 3” C Structural Steel cold rolled rings, external

Suspension: HT 300 Air Ride, spring ride Optional

Tandem Axle: 30,000 lb. Capacity

Wheels: 10-hole hub piloted aluminum or Steel

Tires: 11R 24.5 Cut and chip resistant

Brakes: 16 1/2” X 7” Spring Parking, Auto slacks, 2S1M ABS SYSTEM on one axle.

Upper Coupler: Bolt on 3/8” ASTM A572 GRADE 50 Steel King Pin Plank

Landing Gear: 2 Speed Heavy Duty

Bumper: 6” X 4” HSS Square Tube ¼”

Fenders: Full Length Formed Hose Trays

Outlets: Two 4” Butterfly valves at rear with Sump

Reliefs: 1-1/2” Vacuum Relief, 2” Pressure Relief, both located at the top front of barrel, 2” Blow down line at rear with glycerin filled vacuum gauge

Manways: Four, 3 located on top, one on rear head, all 21” Domed Style with Plated swing Bolts and wing nuts

Scrubbers: Primary and Secondary with hose connections 4”

Lighting: Full LED Dot certified, sealed lights and harness, two rear work lights with integral switches. One Yellow strobe Turret

Level Gauge: Sight glass, optional

Coatings: All Surfaces White metal sandblasted, Interior Lined with Chemical resistant 85% solids epoxy liner, 10 ml dry film thickness, exterior coated with high build epoxy primer and color coated with achrylithane enamel, 4 ml dry film thickness.

Specifications

LENGTH: 39 ft

WEIGHT: 12,000 Lb.

COMPOSITION: STEEL

HYDRAULIC CYLINDER: TELESCOPIC 5 STAGE SINGLE ACTING

TUB: 5MM HARDOX 500TUF FLOOR AND FRONT END

WALLS: 36 INCHES TALL WITH 6 INCHES WOOD BANG BOARDS

REAR GATE: 5MM HARDOX 500TUF

CHASSIS AND RIBS: HIGH STRENGTH STEEL

SUSPENSION: 50,000 Lb. SINGLE POINT

AXLES: 30,000 Lb. WITH AUTO SALCK ADJUSTERS AND DOUBLE BRAKE CHAMBERS

LANDING GEAR: STEEL SQUARE TUBING DROP LEGS

BRAKES: 2S1M ANTI BLOCKING SYSTEM

TIRES: 24.5 CUT AND CHIP RESISTANT ON 8 ALUMINUM WHEELS

ELECTRICAL: SEALED HARNESS WITH TRAKTOLAMP LED LIGHTS

TARP: ELECTRIC CABLE ROLL FRONT TO BACK

FENDERS: FRONT AND REAR DIAMOND PLATE ALUMINUM

PAINT: EPOXY PRIMER AND ACRYLITHANE FINISH

Specifications

FRAMELESS HALF ROUND END DUMP TRAILER

MODEL: TUFFMAX 500

CAPACITY: 26 CUBIC YARD

LENGTH: 32’

TUB: 5MM OR ¼” HARDOX 500TUFF ABRASION RESISTANT STEEL

HYDRAULIC CYLINDER: 5 STAGES, 235” STROKE SINGLE ACTING TRUNION MOUNT CYLINDER

REAR GATE: 5MM OR ¼” HARDOX STEEL GATE WITH PNEUMATIC HIGH LIFT SYSTEM WITH ALUMINUM AIR CYLINDERS AND IN-CAB CONTROL WITH DEDICATED 12” AIR TANK AND ELECTRIC ACTUATOR

SUSPENSION CHASSIS AND RIBS: 3/16” STRENX 110XF HIGH STRENGHT STEEL

SUSPENSION: 50,000 LBS SINGLE POINT SUSPENSION

AXLES: TWO 30,000 LBS AXLES

LANDING GEAR: ¼ STEEL SQUARE TUBE 3 POSITION HEAVY DUTY TELESCOPIC DROP LANDING LEGS

BRAKES: 2S1M ABS SYSTEM

TIRES: 22.5 CUT AND CHIP RESISTANT MOUNTED ON 8 STEEL WHEELS

ELECTRICAL: SEALED HARNESS WITH LED LIGHTS WITH REAR STROBE AND REAR STEEL PROTECTION

TARP: ELECTRIC ROLL UP TARP SYSTEM WITH IN-CAB CONTROLS

FENDERS: FRONT AND REAR BOLT ON DIAMOND PLATE ALUMINUM FENDERS WITH MUDFLAPS

PAINT: ACRYLITHANE ENAMEL, PRIMED, SANDBLASTED TO BARE METAL

Main beams fabricated with 3/16 STRENX 110XF steel WEB and 3/8” STRENX 110XF top and bottom flanges

Cross Members Formed 10 Ga STRENX 110XF steel at 16” centers

OPTIONS: 12” CENTERS, 3/16” STRENX 110XF STEEL

COIL PACKAGE: 7 CENTER CROSSMEMBERS AT 8” CENTERS

GVWR 90,000 LB

6” structural steel channel side rails

3/16” STRENX 110XF steel Fabricated knee braces

Tare weight approx. 13,000 lbs.

Total Width:102”

Lower deck height: 40” from ground

Length: 48’ or 53’

Stake pockets fabricated with 3/16” STRENX 110XF steel at 24” centers

Pipe spools centered between stake pockets

OPTIONS: DOUBLE PIPE SPOOLS

2 ½” steel rub rail

OPTIONS: 3” RUB RAIL

4 steel bulkhead pockets

DOVE TAIL WITH TWO FULL WIDTH SPRING ASISTED STEEL ANGLE RAMPS

18” X 18” X 48” TOOLBOX WITH ALUMINUM DOOR

Steel square tube bumper

18” Kingpin Setting

King pin Plate: 3/8” thick ASTM 572 GR50 plate

King Pin: SAF HOLLAND

Landing Gear: 50,000LB lift/180,000LB Static with 2 Speed Gearbox

1 1/8” Apitong floor

Air Ride suspension, 30,000 Lbs. GAWR

Two 71.5” Round 30,000 Lbs. axles, 122” Axle Spacing.

Tapered axle spindle, oil bath hub wheel end

Spring brakes, auto slack adjusters

2S1M ABS brake system

Tires: 255/70 R22.5 low profile Tires

Wheels: 22.5 steel wheels

Mudflaps: 24” x 36”

Electrical: SEALCO Sealed wiring harness LED lights package

3M Conspicuity tape

10 sliding winches with track welded on curb side

24 Recessed Floor Chain tie downs on deck

Two rear rubber dock bumpers

Documents holder

Sandblasted to bare metal

HEMPEL Epoxy primer

HEMPEL Acrylic Urethane enamel, colors to choose from BLACK, BLUE and RED

Options:

Aluminum wheels -

Aluminum toolbox - .